Web Menu

Product Search

Language

Share

News
Home / News
News
  • Fitting of rolling bearings

    Fitting of rolling bearings

    1. The choice of cooperation 　The inner diameter and outer diameter of the rolling bearing are manufactured according to standard tolerances. The tightness of the fit between the inner ring and the shaft, and the outer ring and the seat hole can only be achieved by controlling the tolerance of the j... read more

    Nov 11,2021 News
  • Installation of rolling bearings

    Installation of rolling bearings

    Whether the bearing is installed well or not will affect the accuracy, life and performance of the bearing. Therefore, please fully study the installation of the bearing, that is, please install the bearing in accordance with the operating standards including the following items.1. Cleaning the bear... read more

    Nov 04,2021 News
  • The main steps of tilting pad bearing adjustment

    The main steps of tilting pad bearing adjustment

    According to the data that the rotor needs to be adjusted, the thickness of the lower half of the pad adjustment gasket needs to be adjusted.For example: if you want to raise the rotor by 0.20mm, you must replace the left and right adjustment shims in the lower half with shims that are 0.20×0.7 = 0.... read more

    Oct 26,2021 News
  • Tilting pad bearing adjustment

    Tilting pad bearing adjustment

    The main steps of tilting pad bearing adjustmentAccording to the data that the rotor needs to be adjusted, the thickness of the lower half of the pad adjustment gasket needs to be adjusted.For example: if you want to raise the rotor by 0.20mm, you must replace the left and right adjustment shims in ... read more

    Oct 20,2021 News
  • Motor bearing replacement steps(2)

    Motor bearing replacement steps(2)

    2. Install the bearingWhen the vibration motor is replaced with a new bearing, the same bearing as the original model must be used.(1) Wash the bearing with kerosene, press it into the bearing seat, fill the rollers of the outer ring of the bearing with Shell No. 3 lithium base grease to two-thirds ... read more

    Oct 14,2021 News
  • Replacement steps of motor bearings (1)

    Replacement steps of motor bearings (1)

    There are two main types of vibrating motors for vibrating screens. Vertical vibrating motors are mainly used in rotary vibrating screens. Horizontal vibrating motors can be used in various vibrating screening equipment, and vibrating motors are the main excitation of vibrating screens. Source, its ... read more

    Oct 09,2021 News