Disassembly steps and precautions for spherical bearings with seats

1. Use an Allen wrench to loosen the locking screw on the bearing eccentric sleeve, then use a small iron rod to insert the counterbore on the eccentric sleeve of the top cover, and loosen the eccentric sleeve against the direction of shaft rotation.

2. Loosen the bolts fixing the bearing seat. Remove the bearing together with the bearing housing from the shaft. Note before removing the bearing seat at one end of the shaft. The bearing housing bolts at the other end of the shaft should be loosened to avoid damage to the bearings at both ends.

www.bhsbearings.com