What is the correct way to use stainless steel bearings?

In addition to being of high quality, stainless steel bearings are also very precise parts. Generally speaking, as long as the stainless steel bearings are used correctly, they can usually be used until they reach the fatigue life. But there will be accidents that damage it prematurely and cannot withstand the use. This early damage is relative to the fatigue life. It is a quality limit called failure or accident. It is caused by carelessness in installation, use, and lubrication, and foreign objects invading from the outside. The research on the thermal effects of the shaft and casing is not enough. Fully wait.
Common damage conditions of stainless steel bearings such as: the ring of the roller bearing and the seizure of the ribs can be considered as reasons, insufficient lubricant, unsuitability, defects in the oil supply and discharge structure, the intrusion of foreign objects, bearing installation errors, shaft If the deflection is too large, these reasons will also overlap. Among them, improper installation, external immersion in use and improper lubrication are the main causes of stainless steel bearing damage. If it is improperly operated during application, it will not only fail to achieve the expected performance, but also easily damage the stainless steel bearings.
When the stainless steel bearing fails, if you know the use of stainless steel bearings, the conditions of use, the structure around the high-temperature bearing, understand the situation before and after the accident, combined with the damage status of the bearing and several reasons for inspection, you can prevent the same type of accident from recurring Therefore, everyone should pay more attention to the use of stainless steel bearings to prevent damage to the bearings and affect their work.
In addition, some points that are easy to ignore are particularly pointed out:
1. Dust, even fine dust that is invisible to the naked eye can increase bearing wear, vibration and noise.
2. Sweat, when taking the stainless steel bearing directly by hand, it is necessary to fully wash the sweat from the hands, it is best to wear professional gloves to operate.
3. Storage. In the rainy season and summer, special attention should be paid to the preservation method to avoid rust.